FiBER FORCE:
PRODUCTS
sc_starter1

SAVE $290 with this FiBER FORCE starter kit

ONLY $749 (reg: $1,039)

Everything you need to integrate FiBER FORCE into use for denture reinforcement and repair: (makes 9 full reinforcements and 12 repairs)

  • 3 - packs of FiBER FORCE mesh (pink)
  • 1 - pack of FiBER FORCE 2mm braided rope (pink)
  • 1 - pack of FiBER FORCE UD fibers (pink)
  • 1 - syringe of FiBER FORCE pink light cure resin (3ml each)
  • 100 - sheets of pink spacer wax (0.5mm)
  • 100 - patient brochures
  • 1 - Splintvac vacuum forming unit


sc_pink_mesh
Contents:
2 rectangular mesh 53mm x 80mm
(pre-impregnated with light-curable pink resin)

Uses:
New full dentures; Implant-supported dentures; Denture repairs

Notes: Incorporating FiBER FORCE into new dentures requires use of the Splintvac forming unit, available separately, or included with FiBER FORCE web special intro kit.



sc_pink_UD
Contents:
2 Unidirectional Fibers
(2mm diameter, pre-impregnated with pink resin)

Uses:
Denture repairs; Various other acrylic reinforcements.

Notes: UD fibers are the most resistant of the stranded materials (UD, braid, tape), but are somewhat less pliable and more difficult to place into certain shapes, such as a loop. They are recommended when maximum resistance and reinforcement is preferred. They are easily split lengthwise with a blade to obtain narrower sections.


sc_white_UD
Contents:
2 Unidirectional Fibers
(2mm diameter, pre-impregnated with clear resin)

Uses:
Reinforcing long span and/or long term temporary restorations; Misc. laboratory applications; Intra-oral applications.

Notes: UD fibers are the most resistant of the stranded materials (UD, braid, tape), but are somewhat less pliable and more difficult to place into certain shapes, such as a loop. They are recommended when maximum resistance and reinforcement is preferred. They are easily split lengthwise with a blade to obtain narrower sections. When space is limited, they can also be flattened before curing.



sc_pink_2mm
Contents:
2x Pink braid, ° 2,2 mm x 150 mm


Uses:
Denture repairs; Additional support for implant-supported dentures; Other lab applications for reinforcing denture acrylic.


sc_white_2mm
Contents:
2x White braid, ° 2,2 mm x 150 mm
Uses:
Intra-oral splinting; Reinforcing long span and/or long term temporary restorations; Reinforcement for orthotic appliances; Misc. laboratory applications; Other intra-oral applications requiring splinting, Stabilization or reinforcement.



sc_pink_1mm
Contents:
2x Pink braid, ° 0,8 mm


Uses:
Tooth additions on full and partial dentures; Additional support for implant-supported dentures; Other lab applications for reinforcing denture acrylic when space is limited.


sc_white_1mm
Contents:
2x White braid, ° 0,8 mm x 150 mm


Uses:
Intra-oral splinting; Reinforcing long span and/or long term temporary restorations; Misc. laboratory applications; Intra-oral applications; Most useful when space is limited.



sc_white_tape
Contents:
2x White ribbon, 2,0 mm x 0,5 mm x 150


Uses:
Intra-oral splinting, such as: stabilizing mobile teeth, immediate tooth replacement, post-orthodontic splinting, reinsertion of teeth lost to trauma; Lab usage, such as: reinforcing long span and/or long term temporary restorations, Composite Maryland bridge, Repair of broken appliances, etc.


sc_pink_resin
Contents:
1 - 3ml syringe

Uses:
FiBER FORCE pink light cure resin is used in the framework fabrication process to create tissue stops. Il can also be used to tack the framework to the model when using an injection process, and as a repair acrylic to replace cold cure acrylic.



sc_splintvac
Contents:
1 - Splintvac unit, 3 - silicone membranes

Uses:
The Splintvac is a unique, simple-to-use vacuum forming device specifically designed for FiBER FORCE mesh. It allows the user to make perfectly adapted, thin FiBER FORCE reinforcements - every time. Through use of a vacuum pump, a silicone membrane pulls down on the uncured mesh to precisely adapt the mesh to the model. The Splintvac is then inserted into a light-curing unit and the mesh is quickly cured into its final shape.

Notes: The Splintvac is necessary for forming mesh for new dentures only, and is not required for denture repairs.


sc_membrane
Contents:
3 - silicone membranes

Uses:
Part of the Splintvac unit, it's a simple-to-use vacuum forming device specifically designed for FiBER FORCE mesh. (see Splintvac unit)