KITS & COMPONENTS

FiBER FORCE® CST® Complete Kit

Includes:
  • 1x Pink Fiber (Hybrid 1:6), 1,3 mm, 450 mm
  • 1x Pink Fiber (Hybrid 1:4), 1,2 mm, 300 mm
  • 1x BioBond SF, 5ml
  • 1x Pink resin light cure, 3ml + 5x cannulae ET + 5x cannulae RT
  • 3x Pillar 1,2mm

Usage:
The best way to get started with CST®. Enough material to complete two frameworks as well as accessory materials to be used over multiple cases.


cst_kit

FiBER FORCE® CST® Refill Kit

Includes:
  • 1x Pink Fiber (Hybrid 1:6), 1,3 mm, 450 mm
  • 1x Pink Fiber (Hybrid 1:4), 1,2 mm, 300 mm
  • 3x Pillar 1,2mm

Usage:
Perfect when re-ordering the fibers and support pillars only. Enough for one framework.


cst_refill_kit

CST® 1:6 Hybrid Compressible Fiber

1x Pink Fiber (Hybrid 1:6), 1,3 mm, 450 mm

Usage:
CST® 1:6 hybrid compressible fibers are larger in diameter than the 1:4 hybrid compressible fibers and are used to create the three-dimensional base of the CST framework. One package contains enough material to complete all required “runs” in the majority of 4 to 6 implant cases.


cst_refill_kit

CST® 1:4 Hybrid Compressible Fiber

1x Pink Fiber (Hybrid 1:4), 1,2 mm, 300 mm

Usage:
CST® 1:4 hybrid compressible fibers are smaller in diameter than the 1:6 hybrid compressible fibers and are used to create the “stays” or “stringers” of the CST framework. One package contains enough material to complete all required “runs” in the majority of 4 to 6 implant cases.


cst_refill_kit

CST® Flow Pink Resin

1x Pink resin light cure, 3ml + 5x cannulae ET + 5x cannulae RT

Usage:
CST® Flow pink resin is a light cured UDMA resin or composite. In the CST technique it is used as wetting agent to facilitate placement of the CST hybrid compressible fibers.


cst_flow

CST® Bond Resin

1x BioBond SF, 5ml

Usage:
CST® Bond light cured resin is used in the CST technique to prepare the surfaces of the titanium cylinders for bonding with the CST hybrid compressible fibers.


cst_bond

CST® Support Pillars

3x Pillar 1,2mm

Usage:
CST® support pillars are used (two per arch) to create a purchase point from which to start applying the hybrid compressible fibers and keep them in tension. They also demarcate the most distal position of the denture. CST support pillars are made of e-glass fibers (like the CST hybrid compressible fibers) and are fully compatible with the range of materials used in the CST technique.


cst_pillars

CST® Support Pillar Drill

1 - FiBER FORCE® CST® Temporary Support Pillar Drill

Usage:
CST® Support Pillar drills are used to create holes in the working model that are of the ideal diameter to accept placement of the support pillars and to allow for maximum precision of fit.


cst_pillars